Meer details: TOOLS GROUP - 3807-ELECTRICAL SYSTEM TOOLS
CHARGER EU OPTIMATE 2 DUO DRAG
€91,90
Inclusief belasting
Verzendkosten worden berekend bij het afrekenen.
Verkoper DRAG SPECIALTIES
SKU: 38070698 | TM556
Battery ChargerDrag Specialties Battery Charger Optimate 3 Overview of Product: Unique affordable 6-step battery optimiser. Easy to use with the original OptiMate functions and intuitive LED display 0.8 Amp charge rate Battery check: OptiMate 3 must be connected to a battery (retaining a minimum of 2V) to activate its output. Desulphation and recovery stage: Tests the battery for possible deep discharge or sulphation. If necessary, OptiMate 3 automatically engages a special high voltage recovery mode (up to 20V) with a very low fixed current to desulphate the battery. Bulk charge stage: Charges at 0.8 Amps constant current until such time as the battery is normally able to crank the engine. Verification stage: A 30 minute charge & check cycle ensures that even well-used batteries are brought to full charge saturation. If necessary the programme reverts automatically to the bulk charging stage, repeating steps 3 & 4 as many times as may be necessary until the battery is thoroughly charged. Voltage retention test: During a 30 minute pause the charging circuit monitors the battery's voltage to identify batteries unable to retain an adequate charge without charger support. The green LED indicates that the battery has passed the charge retention test and the red LED indicating that the battery voltage failed to remain above 12V. (A fully charged, undamaged lead-acid battery should normally retain a voltage of at least 12.5V.) Maintenance / float charge stage: Irrespective of the voltage retention test result, a maximum voltage of 13.6V is applied with up to 200mA available to support connected electronic alarms or other small loads.